无码AV国产东京热AV无码

<label id="qmqsc"></label>
<rp id="qmqsc"><samp id="qmqsc"></samp></rp>

<dd id="qmqsc"><optgroup id="qmqsc"></optgroup></dd>
  1. <nav id="qmqsc"><track id="qmqsc"></track></nav>

    Common failure reasons and elimination methods of jaw crusher

    In this article, we will introduce the common fault causes and troubleshooting methods of the jaw crusher:

    Common failure reasons and elimination methods of jaw crusher
    Common failure reasons and elimination methods of jaw crusher

    Fault: The flywheel rotates but the moving jaw stops swinging.

    Causes:

    1.The thrust plate is broken;

    2.The connecting rod is damaged;

    3.The spring is broken.

    Remedy:

    Replace the thrust plate;

    Repair the connecting rod;

    Replace the spring.


    Fault: Loose tooth plate, metal impact.
    Cause: The fixing screw of the tooth plate or the side wedge plate are loose or loose.
    Remedy: tighten or replace the screws or side wedges.


    Fault: The bearing temperature is too high.

    Cause:

    1.Insufficient grease or dirty;

    2.The bearing gap is not suitable or the bearing is not in good contact or the bearing is damaged.

    Remedy:

    1.Add new grease

    2.Adjust the tightness of the bearing or repair the bearing pad or replace the bearing.


    Fault: The product granularity becomes coarse.
    Cause: The lower part of the tooth plate is significantly worn.
    Remedy: Turn the gear plate or adjust the discharge port.


    Fault: Thrust plate support pad produces impact sound

    Cause

    1.Insufficient spring tension;

    2.The bearing pad is worn or loose

    Remedy:

    1.Adjust the spring force or replace the spring;

    2.Tighten or modify the support base.


    Fault: The spring is broken.
    Cause: The spring was not loosened when adjusting the discharge port.
    Remedy: When the discharge port is adjusted small, first relax the spring, and after adjustment, tighten the rod nut properly.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    无码AV国产东京热AV无码
    <label id="qmqsc"></label>
    <rp id="qmqsc"><samp id="qmqsc"></samp></rp>

    <dd id="qmqsc"><optgroup id="qmqsc"></optgroup></dd>
    1. <nav id="qmqsc"><track id="qmqsc"></track></nav>